2011-2014 Porsche Cayenne Panoramic Roof 7P0877041C

Also known as

Panoramic Sunroof

Pano Roof Assembly

Sunroof Cassette

Moonroof Assembly

Glass Roof System

Sunroof Frame and Glass

What this part does

The panoramic roof assembly provides a multi-panel glass opening spanning the front and rear passenger areas. It consists of the structural aluminum frame, sliding front glass, fixed rear glass, integrated sunshade tracks, and the mechanical drive cables. It operates via an electric motor to slide or tilt the front glass panel while managing water run-off through four corner drainage channels. Component failure typically presents as a sunroof that binds off-track, grinding noises from stripped drive cables, or severe water ingress into the headliner due to cracked water channels. Because the inner mechanical guides and lifting arms are integrated into the main cassette, a complete frame replacement is the standard repair for broken mechanical tracks.

Fits these vehicles

OEM and interchange numbers

7P0877041C

7P0-877-041-C

7P0877041

Before you order

Replacing this module requires removing the interior pillar trims to safely lower and extract the headliner. Sunroof drive motors are typically transferred from your original unit. Once the assembly is bolted in and the motors are attached, the system must undergo a basic initialization procedure using a diagnostic scan tool so the control module can relearn the pinch-protection limits and endpoint stops.

Inspect your original factory drain tubes for clogs, debris, or shrinkage before connecting them to this replacement frame. Blocked drains will cause water to back up and spill over the track edges into the vehicle interior. Verify your current roof matches the exact OEM number provided, as standard single-pane sunroof assemblies use completely different mounting points and dimensions.